top of page
RV16E
Road & Electric Operation | Reefer

The RV16E Road operation and Electric Standby reefer unit is designed to deliver reliable performance for fresh or frozen applications on medium, high and extended lenght vans.

​

A direct driven engine-mounted compressor provides superior cooling, performance and guaranteed affordability.

RV16E Reefer
RV16E Reefer
Standard | Features 

  • ​​CPR Compressor protection valve R404a

  • Compressor oil separator - Extended service life

  • Hot gas defrost

  • Slim line cooler - Maximum cargo space

  • Simple operation temperature cab controller (°C /°F) 

  • Lightweight in design ​

  • High cooling capacity 14700 BTU

  • R404a freezer refrigerant

  • R452a refrigerant compatible

  • VALEO  Road compressor

  • High air flow evaporator cooling fans 

  • 3 years warranty on parts and labor

Performance | Quality | Durability | Low Service Cost | Best Price
RV16E | Specifications 
Temperature Guide:
Cooling Mode
BTU
Watts
Road Cooling 0°F (-18°C)
7000
2050
Road Cooling 35°F (2°C)
14700
4300
Electric Cooling 0°F (-18°C)
4000
1170
Electric Cooling 35°F (2°C)
7890
2310
Components:
Specification
Value
Vehicle Application
High Roof
Air Flow
1375 CFM
Evaporator Dimension
47.5" x 23" x 7.8" (1206 x 584 x 198mm)
Condenser Dimension
49" x 22" x 8" (1245 x 558 x 203mm)
Evaporator Weight
65 LB (29 KG)
Condenser Weight
210 LB (95 KG)
AMP Draw (12VDC/AC)
38A / 18A
Standby Voltage
115V (30A)
Refrigerant Charge
3.8 LB (1.7 KG)
Refrigerant
R404A (R452A)
Defrost
Hot Gas
Compressor
TM16

*Ambient 100°F (38°C)

*Assume min. 3" of insulation for 35°F (2°C) and min. 4" of insulation for 0°F (-18°C) with added polar walls

Reefer Operation - TIPS & HINTS 

 

  • Pre-chill the cargo area for 15 minutes before loading on very hot days.

  • Switch the reefer unit off while loading product into cargo area.

  • Minimize the length of time that doors are open when delivering.

  • Product should be stored at the correct temperature before loading.

  • Do not block the evaporator air intake or outlets.

  • Allow space around all sides of the load for air circulation.

  • Check the load temperature regularly.

  • When using power standby check that the mains power supply is suitably rated to power the reefer unit.

  • Switch the vehicle engine off and cab control off before connecting mains power.

  • Avoid using additional extension leads on electric standby. Maximum length of cable 25 feet

bottom of page